+31 (0)76 596 9250

World’s best stuff for leaks, drips and spills.®

New!PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders

  • Call attention to hazards and provide a no-slip path for foot traffic with our highly visible, super-safe, adhesive-backed absorbent runner - yellow and black pattern runs down both edges of mat roll, helping to indicate hazards and boost safety
  • Adhesive-backed floor mat stays exactly where you put it with no shifting, bunching up or flipping over; traps dirt, salt and moisture to keep it from being tracked around. Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily - will stick to most common commercial floor surfaces, including: concrete, vinyl tile, ceramic tile, quarry tile and linoleum
  • Extreme durability that stands up to heavy traffic — even forklifts — stays in place for up to 3 to 6 months, depending on conditions and traffic patterns; has a 91% LOWER environmental impact than rental floor mats. (Full report published in English only and available on request)
  • Easy to use: roll out continuous coverage with no gaps, ripples or overlaps that cause slips and trips
  • Easy to clean: sweep, vacuum, mop, use a shop/wet vac or run a floor scrubber over it and it won’t budge. (cleaning helps to restore hi-viz properties of safety border)
  • Easy to customise: lets you create custom-size floor mats that promote the safest path, even around corners. Mat goes down easier with these custom tools.
Item Number Product Name Dimensions Details Unit
GRPSB36200 PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders 91 cm W x 30 m L Absorbs 30 L/Roll 1 Roll
GRPSB36201 PIG® Grippy® Adhesive-Backed Floor Mat with Safety Borders 91 cm W x 15.3 m L Absorbs 15 L/Roll 1 Roll

Safety Data Sheet

Product Data Sheet

Chemical Compatibility Guide

Certifications & Approvals

  • DIN 51130:2014 – R13
    • PIG Grippy Floor Mat classified as slip resistance R13 according to DIN51130 - suitable for use on floors in workrooms and work areas where there is increased risk of slipping due to grease, oil, water, foods, left-overs, dust, flour, paint clippings etc.
  • BS7976-2:2002+A1:2103 - low slip
    • Tested in accordance with BS 7976-2:2002+A1:2013, and demonstrated low slip potential in both wet and dry conditions
  • BS EN 13501-1:2007+A1:2009 - Bfl-s1
    • Fire classification Bfl-s1 when tested according to BS EN 13501-1
  • NFSI Certified
    • When used as part of your floor safety program, high-traction surfaces such as PIG Grippy Floor Mat have been proven to reduce slip-and-fall claims by as much as 90%.
  • ASTM G154-1
    • When tested using ASTM G154-1 for UV and weathering, there is no fading, degradation or loss of strength when exposed to the equivalent of 1 year.